基于语义相似度计算的航天标准关联度评价

随着航天领域各级各类标准编制数量的逐年递增，相关标准之间的交叉重复制定问题随之而来。为解决该问题，文中通过计算语义相似度的方法开展航天领域标准名称、标准范围及主要内容的关联度评价。算例分析结果表明，该方法可以有效评估标准间的关联程度。     

Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.     

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

多梁复合结构的动力学建模及全局解析振型分析

多梁复合结构广泛用于工程领域，其动力学特性对相关装备的工作状况有着重要影响，建立准确适用的动力学模型对后续的动力学响应参数影响规律研究有决定性作用。针对工程中常见的多梁复合结构，给出了位移场的一般表达式，利用哈密顿原理得出多梁复合结构的运动控制方程和边界条件，对其全局解析振型进行理论计算，给出了计算多梁复合结构数值振型的一般过程，基于数值分析和实验分析以L型梁和Z型梁为例利用频率相对误差、振型定性比较和MAC定量分析说明了全局解析振型的求解验证方法，利用伽辽金方法和全局解析振型给出了截断原系统得到离散系统运动方程的一般形式。提出的多梁复合结构的建模方法和全局解析振型求解验证方法，对工程中此类结构动力学响应的参数影响规律研究有重要意义。     

联邦学习安全与隐私保护综述

联邦学习是一种新型的分布式学习框架，它允许在多个参与者之间共享训练数据而不会泄露其数据隐私。但是这种新颖的学习机制仍然可能受到来自各种攻击者的前所未有的安全和隐私威胁。本文主要探讨联邦学习在安全和隐私方面面临的挑战。首先，本文介绍了联邦学习的基本概念和威胁模型，有助于理解其面临的攻击。其次，本文总结了由内部恶意实体发起的3种攻击类型，同时分析了联邦学习体系结构的安全漏洞和隐私漏洞。然后从差分隐私、同态密码系统和安全多方聚合等方面研究了目前最先进的防御方案。最后通过对这些解决方案的总结和比较，进一步讨论了该领域未来的发展方向。     

多种工质下螺旋波等离子体源波场结构数值模拟

针对螺旋波等离子体放电机理，开展了多种工质条件下的螺旋波放电等离子体内波场结构数值模拟研究。计算发现:氦气等离子体的Er分量在径向边界处的峰值更为突出，有利于等离子体在径向的输运，波电场径向分量决定了电流密度径向分量在内部的表现。在0.266 Pa和1.064 Pa两种气体压强条件下，通过波场结构验证了气压对于波阻尼影响的结论。波场结构是螺旋波在等离子体内传播以及能量沉积的微观体现，研究螺旋波波场结构是揭示其高电离效率的重要途径。初步探索了功率耦合机制，为实验系统优化及实验方案设定奠定理论基础。     

超临界CO2技术对空心/实心石英混编纤维表面改性

采用热处理+溶剂浸洗+超临界CO2技术对空心/实心石英混编纤维表面进行预处理,同时利用超临界流体的携带与渗透作用,将KH-560偶联剂引入纤维表面进行改性。采用接触角测试、表/界面张力测试、树脂吸附量测试、力学性能测试、扫描电镜等分别测试纤维表面能、胶液表面张力与接触角、胶液与纤维浸润性,观察纤维表面形貌结构,分析复合材料的力学与介电性能。结果表明:采用热处理+溶剂浸洗+超临界CO2技术可有效去除空心/实心石英混编纤维表面浸润剂,提高纤维表面能,促进胶液与纤维的完全浸润,最终改善复合材料力学与介电性能。     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

永磁同步电机最优滑模控制

为了减少永磁同步电机调速中的动态误差,提出了一种积分性能最优的滑模控制方法。该方法以滑模控制中的动态误差为性能指标,在此基础上建立最优切换函数,并采用最优控制理论对滑模控制器进行设计。用该方法设计的滑模控制系统,通过滑模面斜率的连续变化,能够加速系统状态变量到达滑模面的过程,极大地提高对参数摄动和外部干扰的鲁棒性。仿真结果表明,该时变滑模面控制方法使系统具有无超调、快速、稳定等优点,提高了系统的鲁棒性。     

超高强高韧马氏体时效钢热变形及航天应用研究

对于航天用超高强高韧C300马氏体时效钢来说,热加工过程中获得等轴细小的再结晶晶粒是实现该钢强韧性最佳匹配的关键环节。采用Gleeble-3800热模拟试验机在温度为850～1 150℃、应变速率为0.01～10 s~(-1)的条件下,对超高强高韧C300马氏体时效钢进行高温轴向压缩变形试验,获得了高温流变曲线,并观察变形后的金相组织。结果表明:C300马氏体时效钢的流变应力和峰值应变随着变形温度的升高和应变速率的降低而减小;试验钢在真应变为0.92、应变速率为0.01～10 s~(-1)的条件下,随着变形速率的提高,其发生完全动态再结晶的温度也逐渐升高,最佳热变形温度区间为1 050～1 150℃;测得试验钢的热变形激活能Q值为391.2 kJ/mol,建立了其热变形本构方程。结果能为C300马氏体钢的数值模拟和热加工工艺的制定提供理论基础。